Skip to content

SSH

SSH is a data channel type in GOST.

SSH has two modes: tunnel mode and forwarding mode.

Tunnel Mode

Server

gost -L relay+ssh://:2222

services:
- name: service-0
  addr: :2222
  handler:
    type: relay
  listener:
    type: ssh

Client

gost -L :8080 -F relay+ssh://:2222

services:
- name: service-0
  addr: :8080
  handler:
    type: auto
    chain: chain-0
  listener:
    type: tcp
chains:
- name: chain-0
  hops:
  - name: hop-0
    nodes:
    - name: node-0
      addr: :2222
      connector:
        type: relay
      dialer:
        type: ssh

Forwarding Mode

The port forwarding function of the standard SSH protocol is used and only TCP is supported.

Server

gost -L sshd://:2222

services:
- name: service-0
  addr: :
  handler:
    type: sshd
  listener:
    type: sshd

Client

gost -L tcp://:8080/:80 -F sshd://:2222

services:
- name: service-0
  addr: :8080
  handler:
    type: tcp
    chain: chain-0
  listener:
    type: tcp
  forwarder:
    nodes:
    - name: target-0
      addr: :80
chains:
- name: chain-0
  hops:
  - name: hop-0
    nodes:
    - name: node-0
      addr: :2222
      connector:
        type: sshd
      dialer:
        type: sshd

Use the system's native SSH service

In forwarding mode, the server can directly use the system's standard SSH service, such as the OpenSSH (sshd) service in Linux .

Authentication

SSH tunnel supports two authentication methods: username-password authentication and PubKey authentication.

Username-Password Authentication

The Scope of Authentication information

In command line mode, the authentication information (user:pass) sets the authentication of the SSH tunnel (Listener and Dialer), not the Handler and Connector. This behavior is only valid when using ssh or sshd tunnels.

Server

gost -L relay+ssh://user:pass@:2222

gost -L sshd://user:pass@:2222

services:
- name: service-0
  addr: :2222
  handler:
    type: relay
  listener:
    type: ssh
    auth:
      username: user
      password: pass

Client

gost -L :8080 -F relay+ssh://user:pass@:2222

gost -L tcp://:8080/:80 -F sshd://user:pass@:2222

services:
- name: service-0
  addr: :8080
  handler:
    type: auto
    chain: chain-0
  listener:
    type: tcp
chains:
- name: chain-0
  hops:
  - name: hop-0
    nodes:
    - name: node-0
      addr: :2222
      connector:
        type: relay
      dialer:
        type: ssh
        auth:
          username: user
          password: pass

PubKey Authentication

Server

The server sets the authorized client public key list through authorizedKeys option.

gost -L "relay+ssh://:2222?authorizedKeys=/path/to/authorizedKeys"

gost -L "sshd://:2222?authorizedKeys=/path/to/authorizedKeys"

services:
- name: service-0
  addr: :2222
  handler:
    type: relay
  listener:
    type: ssh
    metadata:
      authorizedKeys: /path/to/authorizedKeys

Client

The client sets the certificate private key and private key password through the privateKeyFile and passphrase options.

gost -L :8080 -F "relay+ssh://:2222?privateKeyFile=/path/to/privateKeyFile&passphrase=123456"

gost -L tcp://:8080/:80 -F "sshd://:2222?privateKeyFile=/path/to/privateKeyFile&passphrase=123456"

services:
- name: service-0
  addr: :8080
  handler:
    type: auto
    chain: chain-0
  listener:
    type: tcp
chains:
- name: chain-0
  hops:
  - name: hop-0
    nodes:
    - name: node-0
      addr: :2222
      connector:
        type: relay
      dialer:
        type: ssh
        metadata:
          privateKeyFile: /path/to/privateKeyFile
          passphrase: "123456"

Keep-Alive

The client can enable keep-alive through keepalive option and set the interval for sending heartbeat packets through ttl option (default value is 30s).

You can also set the heartbeat timeout duration (default value is 15s) through keepalive.timeout option and the number of heartbeat retries (default value is 1) through keepalive.retries option.

gost -L :8080 -F "relay+ssh://:2222?keepalive=true&ttl=30s"

gost -L tcp://:8080/:80 -F "sshd://:2222?keepalive=true&ttl=30s"

services:
- name: service-0
  addr: :8080
  handler:
    type: auto
    chain: chain-0
  listener:
    type: tcp
chains:
- name: chain-0
  hops:
  - name: hop-0
    nodes:
    - name: node-0
      addr: :2222
      connector:
        type: relay
      dialer:
        type: ssh
        metadata:
          keepalive: true
          ttl: 30s
          keepalive.timeout: 15s
          keepalive.retries: 1

Proxy

SSH tunnel can be used in combination with various proxy protocols.

HTTP Over SSH

gost -L http+ssh://:2222

services:
- name: service-0
  addr: :2222
  handler:
    type: http
  listener:
    type: ssh

SOCKS5 Over SSH

gost -L socks5+ssh://:2222

services:
- name: service-0
  addr: :2222
  handler:
    type: socks5
  listener:
    type: ssh

Relay Over SSH

gost -L relay+ssh://:2222

services:
- name: service-0
  addr: :8443
  handler:
    type: relay
  listener:
    type: ssh

Port Forwarding

SSH tunnel can also be used as port forwarding.

Server

gost -L ssh://:2222/:1080 -L socks5://:1080

is equivalent to

gost -L forward+ssh://:2222/:1080 -L socks5://:1080

services:
- name: service-0
  addr: :2222
  handler:
    type: forward
  listener:
    type: ssh
  forwarder:
    nodes:
    - name: target-0
      addr: :1080
- name: service-1
  addr: :1080
  handler:
    type: socks5
  listener:
    type: tcp

By using port forwarding of the SSH tunnel, a SSH data channel is added to the SOCKS5 proxy service on port 1080.

At this time, port 2222 is equivalent to:

gost -L socks5+ssh://:2222

Comments